Construction Mesh Welding Machine
The Construction Mesh Welding Machine is a CNC-controlled line for accurate roll and panel mesh production. It combines servo-controlled pulling, PLC-coordinated welding and a rigid electrode/transformer assembly to hold repeatable dimensions across long runs. It is designed for manufacturers moving from semiautomatic production to faster changeovers, lower labor demand and stable weld quality.All units are manufactured to ISO 9001 quality standards.
Key Features of the Construction Mesh Welding Machine
- Panasonic servo motor and planetary reducer for precise mesh pulling
- 10-million-cycle compression springs and positioned wire guides
- 125 KVA water-cooled transformer banks
- Automatic cross-wire hopper with gripper-sensor confirmation
- Touchscreen control for mesh dimensions and all station parameters
- Choice of automatic cutting or rolling at the end of the line
Production Process
How This CNC Mesh Welding Line Works
Line-wire preparation
Payoff and straightening equipment prepares low-carbon or galvanized wire for accurate entry into the welding station.
Automatic cross-wire feed
A gripper-confirmed hopper places one cross wire at a time and synchronizes it with the welding rhythm.
PLC recipe control
Operators set mesh pitch, panel length and station parameters from the touchscreen for faster specification changes.
Water-cooled welding
Transformer banks and copper-alloy electrodes stabilize weld quality during long shifts.
Precision pulling
The Panasonic servo system advances the welded mesh and controls panel dimensions and diagonal accuracy.
Panel or roll output
Automatic cutting or coiling equipment is selected according to the required finished mesh format.
Machine Data
Technical Parameters
| Mesh width | 1200 / 1600 / 2100 / 2500 / 3000 mm |
| Mesh length | Up to 6000 mm |
| Wire diameter | 3.0–6.0 mm |
| Electrodes | 24 / 32 / 40 / 51 / 60 pcs |
| Line-wire spacing | 50–300 mm |
| Cross-wire spacing | 50 mm and above |
| Diagonal tolerance | ±2 mm per 2 m |
| Welding speed | 60–80 cycles/min |
| Output | Roll or flat panel |
Parameters are reference configurations. Final values are confirmed against the required wire material, mesh specification, output and factory conditions.
Frequently Asked Questions about the Construction Mesh Welding Machine
Q: What mesh sizes and wire diameters can this machine produce?
A: The machine produces mesh widths of 1200mm, 1600mm, 2100mm, 2500mm or 3000mm, with panel lengths up to 6000mm. Wire diameter ranges from 3.0mm to 6.0mm, with line-wire spacing from 50mm to 300mm and cross-wire spacing from 50mm and above, covering a wide range of construction mesh specifications.
Q: How accurate is the mesh produced by this machine?
A: The line maintains a diagonal tolerance of ±2mm per 2m, ensuring consistent panel dimensions for building, flooring and pathway applications.
Q: Can this machine produce both roll mesh and flat panels?
A: Yes, output can be configured for either roll mesh or flat panels depending on your production needs.
Q: What configurations of electrodes and welding speed are available?
A: The machine is available with 24, 32, 40, 51 or 60 electrodes depending on the model, operating at 60–80 welding cycles per minute for stable, high-output production.
Production Uses
Applications
Typical Applications
- Building and structural reinforcement
- Underfloor-heating grids and industrial floor slabs
- Scaffold walkways and temporary site fencing
- Livestock enclosure and agricultural mesh panels
Need a different specification?
Wire diameter, mesh size, output, automation and production-line layout can be configured for your factory and finished product.
Project Support
From Specification to Production
1. Requirement Review
We review your wire, mesh drawing, target output and available workshop layout before recommending a configuration.
2. Factory Build
Manufacturing progress can be shared during production, with the mechanical and electrical system assembled as one coordinated line.
3. Trial & Inspection
The completed machine is trial-run before shipment. Remote video inspection and sample confirmation are available.
4. Delivery & Support
Layout drawings, operating guidance, commissioning support, operator training and spare-parts service are provided for the project lifecycle.
Machine Details
Structure and Production Details
Get a Configuration & Quote
Send your wire diameter, mesh width, spacing, finished format and target output.
